Oct 29, 2021     Misc. Final Assembly items - (30 hours)       Category: Final (X)

Productive few weeks with installing the prop and fitting the front nose gear strut:

-Installed Spinner on the backing plate
-Trimmed spinner to fit..again..and again..and again.
- happy with spinner fit but stopped trimming until after prop is mounted and cowling mounted to ensure clearance is correct
- Mounted Prop, twice...once to check spinner fit and backplate...second time because there was still a little interference between the backplate and prop when rotated to the full stops.
- Also forgot to remove oil feed cap so this was more difficult than needed to be. I was able to remove w/o any damage but it took a while!


-